| 品牌:远东 | 型号:2CY2.1齿轮泵 | 材质:铸铁 |
| 流量:2.1m3/h | 转速:1450 | 原理:齿轮泵 |
| 用途:增压泵 | 性能:自动 | 驱动方式:电动 |
| 泵轴位置:卧式 | 叶轮数目:单级 | 排出压力:1.45 |
| 效率:45 |
用途:
2CY齿轮泵适用于输送不含固体颗粒和纤维,无腐蚀性,温度不高于200℃,粘度为5×10-6~.5×10-3m2/s(5-1500cSt)的润滑油或性质类似润滑油的其他液体以及用于液压转动系统. 2 cy gear pump is suitable for conveying containing no solidparticles and fibers, non-corrosive, temperature is not higher than 200 ℃, the viscosity of 5 x 10-6 ~. 5 x 10-3 m2 / s (5 to 1500 CST) thenature of the lubricating oil or other similar oil liquid and used forhydraulic rotation system.
工作原理
2CY齿轮油泵系容积式泵,主,被动齿轮与泵体,左右泵盖组成进油,出油二个封闭空间,当齿轮转动时,进油腔的容积,由于啮合齿不断脱开,而由小变大.形成真空,将液体吸入,有齿谷带往油腔,而出油腔容积,由于啮合齿的不断进入啮合而大变小,油液受压缩而被排出,从而达到输送油料的目的. 2 cy gear oil pump is a positive displacement pump, the main,driven gear and the pump body, pump cover around of feed, oil two closed space,when the gears, the oil cavity, the volume of meshing teeth off constantly, andchange from small to large. The formation of a vacuum, the liquid suction,toothed valley to the oil cavity, and the volume of the oil cavity, due to theconstant into the mesh of the meshing teeth and large to small, oil isdisplaced by compression, so as to achieve the aim of oil.
结构特点
本系列齿轮泵主要有齿轮,轴,泵体,泵盖,轴承套,轴端密封等组成.齿轮经氮化处理有较高的硬度和耐磨性.与轴一同安装在可更换的轴套内运转.泵内全部零件的润滑均在泵工作时利用输送介质而自动达到.泵内四个轴承套在泵内浮动安装,随工作压力大小自动调整端面间隙,因此泵的压力稳定,输出流量脉动小,溶积效***.从主轴外伸端向泵看,为顺时针旋转. This series gear pump are mainlygear, shaft, pump body, pump cover, bearings, shaft end seal, etc. The gearafter nitriding treatment had a higher hardness and wear resistance. With theshaft installed in the replaceable shaft sleeve. In all parts of thelubrication pump are using the transmission medium and automatic for when thepump work. Four bearing sleeve inside the pump in the pump float installation,along with the work pressure automatically adjusts end clearance, so the pumppressure stability, the output flow pulsation is small, high volume efficiency.From the main shaft overhang end to the pump, for clockwise.
应用范围
在输油系统中可用作传输,增压泵; In the oilsystem can be used as a transport, booster pump;
在燃油系统中可用作输送,加压,喷射的燃油泵; In the fuel system can be used as a transport, pressure, jet fuel pump;
在液压传动系统中可用作提供液压动力的液压泵; In the hydraulic drive system canbe used as a hydraulic pump of hydraulic power;
在一切工业领域中,均可作润滑油泵用;In allindustrial areas, can be used as lubricating oil pump;
使用与安装: Use and installation:
1、机组应安装在水平水泥基础上,用地脚螺栓固定。1, theunit should be installed in a horizontal cement, on the basis of land use fixedbolt.
2、右联轴器应同轴,安装完成后,转动联轴器确认运转顺畅无负压力现象后,方可进入运行。2, should right coupling coaxial, after the installation iscomplete, turn the coupling confirmed after running smoothly without negativepressure phenomenon, may run into.
3、泵不适合输送不洁油液,故在进口管端应设滤油器。3, thepump is not suitable for conveying impurity oil, therefore, at the inlet pipeshould be set oil filter.
4、泵无安全阀,建议在排油管路中,设安全阀,以确保系统安全运行。4no relief valve, pump, it is suggested that in the discharge of oil pipeline, asafety valve, and to ensure the safe operation of the system.
5、泵的安装高度,不超过允许吸上高度。5, pumpinstallation height, no more than allow on the suction height.
6、泵的转向规定:从泵端向电机看,旋转方向为逆时针。6,pump steering regulation: look from the pump to the motor, for counterclockwiserotation direction.
工作注意事项: Work matters needing attention:
1、开机前应检查泵轴转动是否灵活,有无卡阻现象,进出口管道上的阀门是否开启,泵的旋转方向是否正确。1, should check whether the pump shaft rotation is flexible, beforestarting the presence of jam phenomenon, import and export pipeline valve ***pen, the direction of rotation of the pump is correct.
2、长时间没有使用的泵开机前应向泵腔中注入一定量的润滑液,以减少泵在吸油过程中的干摩擦,并可提高泵自吸性能。2, long time no use the pump to the pump before starting the cavityinject a certain amount of lubricant to reduce the pump in the dry friction inthe process of oil absorption, and can improve the performance of pump.
3、开机后如有不正常的噪音或过热现象,应立即停车检查。3,after the boot if there is any abnormal noise or overheating phenomenon, shouldimmediately stop check.
4、检查泵轴端有无泄露现象,如:对填料密封应适当调紧压紧盖、其他密封则应拆机检查。4, check whether there is any leakage on the pump shaft endphenomenon, such as: the packing should be properly tighten clamp cover andother sealing should teardown check.5、若输送热油,在开车时应均匀预热,预热是利用被输送的介质不断通过泵体进行的。5, if conveying hot oil, while driving should be uniform preheating,preheating is to use the media constantly through the pump body to bedelivered.
6、泵停机时,首先切断电源,然后关闭进出口管道上的阀门,避免造成泵倒转。6,when the pump stop, cut off power supply first, then close the import andexport pipeline valve, avoid to cause back pump.
使用与安装:1、机组应安装在水平水泥基础上,用地脚螺栓固定。2、右联轴器应同轴,安装完成后,转动联轴器确认运转顺畅无负压力现象后,方可进入运行。3、泵不适合输送不洁油液,故在进口管端应设滤油器。4、泵无安全阀,建议在排油管路中,设安全阀,以确保系统安全运行。5、泵的安装高度,不超过允许吸上高度。6、泵的转向规定:从泵端向电机看,旋转方向为逆时针。Use andinstallation: 1, the unit should be installed in a horizontal cement, on thebasis of land use fixed bolt.2, should right coupling coaxial, after theinstallation is complete, turn the coupling confirmed after running smoothlywithout negative pressure phenomenon, may run into.3, the pump is not suitablefor conveying impurity oil, therefore, at the inlet pipe should be set oilfilter.4 no relief valve, pump, it is suggested that in the discharge of oilpipeline, a safety valve, and to ensure the safe operation of the system.5,pump installation height, no more than allow on the suction height.6, pumpsteering regulation: look from the pump to the motor, for counterclockwiserotation direction.
工作原理:本泵系容积式泵,主、被动齿轮与泵体、左右泵盖组成进油、出油二个封闭空间,当齿轮转动时,进油腔的容积,由于啮合齿不断脱开,而由小变大。形成真空,将液体吸入,有齿谷带往油腔,而出油腔容积,由于啮合齿的不断进入啮合而大变小,油液受压缩而被排出,从而达到输送油料的目的。Working principle: this pump is a positive displacement pump, themain around, passive gear and pump body, pump cover of the oil, the oil twoclosed space, when the gears, the oil cavity, the volume of meshing teeth offconstantly, and changes from small to big.Form a vacuum, the liquid suction,toothed valley to the oil cavity, the volume of the oil cavity, due to theconstant into the mesh of the meshing teeth and large to small, oil isdisplaced by compression, so as to achieve the aim of oil.
用途:2CY齿轮泵主要用于各种机械设备中的润滑系统中输送润滑油。Purpose: 2 cy gear pump is mainly used for all kinds of mechanicalequipment of conveying lubricating oil lubrication system.
工作原理:本泵系容积式泵,主、被动齿轮与泵体、左右泵盖组成进油、出油二个封闭空间,当齿轮转动时,进油腔的容积,由于啮合齿不断脱开,而由小变大。形成真空,将液体吸入,有齿谷带往油腔,而出油腔容积,由于啮合齿的不断进入啮合而大变小,油液受压缩而被排出,从而达到输送油料的目的。Working principle: this pump is a positive displacement pump, themain around, passive gear and pump body, pump cover of the oil, the oil twoclosed space, when the gears, the oil cavity, the volume of meshing teeth offconstantly, and changes from small to big.Form a vacuum, the liquid suction,toothed valley to the oil cavity, the volume of the oil cavity, due to the constantinto the mesh of the meshing teeth and large to small, oil is displaced bycompression, so as to achieve the aim of oil.
结构说明:本系列泵主要由:左、右泵盖、泵体、主、被动齿轮轴、轴套、油封等零件组成。Structure description: this series of pump is mainly composed of:left, right, pump cover, pump body, master, passive gear shaft, shaft sleeve,oil seal and other parts.
| 轻柴油供油泵 | NYP-320B-LR-M1-J-W51高粘度泵 | 山东新龙集团有限公司 |
| 润滑油排油泵 | NYP220B-RL-T2-A/J-W21高粘度 | 荣成市泓运船业有限公司 |
| 润滑油输送泵 | NYP50-RU-T2-W51高粘度泵 | 湖北华舟有限公司 |
| 胶水专用齿轮泵 | NYP-320B-RL-T2-A/J-W21高粘度泵 | 青海盐湖工业股份有限公司 |
| 抽沥青泵 | NYP220B-RL-T2-A/J-W21高粘度泵 | 江苏中达新材料集团股份有限公司 |
| 水溶性高分子胶体泵 | NYP220B-RL-T2-A/J-W21高粘度泵 | 山东金正大生态工程股份有限公司 |
| 液体硫磺泵 | G20-1P-W101单螺杆泵 | 山东海科化工集团有限公司 |
| PU合成革聚氨酯树脂泵 | NYP-24高粘度泵 | 浙江昱辉阳光能源有限公司 |
| 输送灌封胶泵 | NYP110-RU-T2-W11高粘度泵 | 贵州开磷(集团)有限责任公司 |
| 输送封口胶泵 | NYP-320高粘度泵 | 贵州轮胎股份有限公司 |
| 消防泡沫灭火剂泵 | G40-2V-W102单螺杆泵 | 山东胜通集团股份有限公司 |
| 输送泡沫原液泵 | W6.4ZK90Z1M1W73双螺杆泵 | 上海申达股份有限公司 |
| 油库装卸泵 | W3.1ZK-30Z1M1W73双螺杆泵 | 山东海力化工股份有限公司 |
| 胶乳泵 | NYP-320B-RU-T1-W12高粘度泵 | 山西兰花科技创业股份有限公司 |
| 船用柴油机喷油泵 | SMH440R43E6.7W28三螺杆泵 | 四川空分设备(集团)有限责任公司 |
| 拉环油齿轮泵 | KCB55齿轮泵 | 山东三工橡胶有限公司 |
| 沥青混合料专用泵 | NYP-80高粘度泵 | 福建金纶高纤股份有限公司 |
| 高粘度耐酸泵 | NYP50-RU-T2-W51高粘度泵 | 广东嘉宝莉化工有限公司 |
| 沥青加压输送泵 | NYP24-RL-T2-A-W61高粘度泵 | 徐州徐轮橡胶有限公司 |
| 高粘度乳液泵 | NYP110高粘度泵 | 山西天泽煤化工集团股份公司 |
| 输送色氨酸泵 | G25-1V-W102单螺杆泵 | 成都市新都化工股份有限公司 |
| 输送苏氨酸泵 | G40-1V-W101单螺杆泵 | 江苏梅兰化工集团有限公司 |
| 主机滑油泵 | SMH1700R42U12.1W28三螺杆泵 | 枣庄扬帆船舶有限公司 |
河北远东泵业制造有限公司坐落于铸造名乡—河北省泊头市。公司占地面积38650平方米,建筑面积20300平方米,是国内***的集设计、铸造、生产、销售、服务于一体的容积泵专业制造厂家。公司始建于1984年,有二十几年专业研制经验。目前产品设计采用国际***水平实体设计软件;产品研发、制造、检验、交付按照***质量管理体系控制过程质量;产品制造广泛使用加工中心、数控机床、专用精机、高精设备;检测设备拥有万能工具显微镜、渐开线检测仪、光学投影仪、万能测齿仪、脉冲辉光离子氮化炉等大型检测设备,并建有国家B级试验站。本厂以***的产品水平、优质的售后服务、恪守信用而在市场上倍受欢迎,产品***不衰,赢得了用户的普遍赞誉。公司已通过***:2000国际质量体系认证,中国船级社CCS型式认证,法国船级社BV产品工厂认证,美国船级社ABS产品质量认证,中国渔业船舶检验局船用泵认证,成为中石油物资资源市场成员、中石化物资资源市场成员。河北省知名产品生产企业,船用泵产品承制企业。Hebei far east pump industry manufacturing co., LTD is located inbotou city, hebei province, a casting of the township.The company covers anarea of 38650 square meters, construction area of 20300 square meters, is thedomestic famous design, casting, production, sales and service in one of thepositive displacement pump professional manufacturer.Company was founded in1984, has 20 years experience in professional development.The current productdesign adopts the international advanced level entity design software;Productresearch and development, manufacture, inspection, delivery, in accordance withthe *** quality management system of process quality control;Widely usedproducts manufacturing processing center, numerical control machine tools,precision machine, high precision equipment;Testing equipment has universaltool microscope, involute tester, optical projector, universal gear tester,pulse glow ion nitriding furnace and other large-scale testing equipment, andbuilt national B level test station.The factory with the first-class products,excellent after-sales service, abide by credit and popular in the market, theproducts sell well and win the user's universal praise.The company has passed***:2000 international quality system certification, China classificationsociety CCS type approval, bureau veritas BV products factory certification,the United States classification society ABS product quality certification,China's Marine fishing vessel inspection bureau pump certification, has been amember of the material resource market in oil, sinopec material resourcesmarket member.Well-known products production enterprise in hebei province, Marinepump products enterprises.
公司以“泊远东”牌齿轮泵,螺杆泵为主导产品,涉及21个系列,4200多种规格,年生产能力达43000多台(套)。产品行销油田、化工、电力、船舶、冶金、食品等各大行业。产品除满足国内客商的需求外,部分出口至东南亚、美洲、欧洲等国家和地区。公司在全国各大城市设有30多个分支机构,并建立了***营销服务网络,拥有一支庞大敬业的营销服务队伍,可为广大客户提供优质的服务。 公司以严谨的质量体系、***的生产设备、***检测手段、丰富的制造经验、务真求实的远东团队,来有效***产品质量。以满腔真诚期待与国内外各界人士携手铸就多方共赢的辉煌。Company to "moored far east" brand gear pump, screw pumpfor the leading product, involves the 21 series, more than 4200 kinds ofspecifications, annual production capacity of more than 43000 Taiwan(sets).Product marketing oilfield, chemical industry, electric power,shipbuilding, metallurgy, food and other major industry.Products in addition tomeet the needs of domestic customers, some exports to southeast Asia, theamericas, Europe and other countries and regions.The company has more than 30branches in major cities throughout the country, and established a perfectmarketing service network, has a large professional marketing services team,can provide the high quality service for the customers.Companies with strictquality system, advanced production equipment, perfect detection means, richmanufacturing experience and WuZhen strives for the far east team, toeffectively ensure the quality of products.To sincerely look forward to workingwith people from all walks of life both at home and abroad hand in hand to owna bright multi-win-win situation.
我公司是一个生产齿轮油泵和螺杆泵的专业公司。公司拥有各种设备80台,主要设备有:C6140 CW6163C车床24台,TX611C/4镗床2台,M131M7130磨床8台,C125A立车2台,Y318K Y3150E滚齿机6台,E3050X16/1摇臂钻床2台,E5163立式钻床2台,B1-400万能铣床3台,螺杆泵转子专用QH2-007铣床1台,半自动螺旋转子QH2-029B铣床2台,X53K立铣3台,半自动螺旋转子QH2-031QH2-032磨刃机台。My company is a company specialized in theproduction of gear oil pump and screw pump.Company has 80 sets of variousdevices, the main equipment are: C6140 CW6163C 24 sets of lathe, TX611C/boringmachine 2 units, 4 M131M7130 grinding machine 8 units, C125A set, 2 sets, Y318KY3150E hobbing machine 6 units, E3050X16/1 radial drilling machine 2 sets,E5163 vertical drilling machine 2 sets, B1-400 universal milling machine 3units, screw pump rotor 1 QH2-007 milling machine, semi-automatic screw rotorQH2-029 - b milling machine 2 sets, X53K three vertical milling, semi-automaticscrew rotor QH2 QH2-031-031 edge grinding machine is used.
我公司拥有省计量局制试验台1台,自制试验台3台,使生产产品从原材料投入到产成品出厂实现了全过程检测。产品出厂合格率 *** ,具备较强的综合配套制造能力。理化试验室、长度计量室是国家计量确认合格单位,使产品从原材料投入到产成品出厂实现了全过程检测。产品出厂合格率*** ,具备较强的综合配套制造能力,公司年可生产各种泵 6000 多台。My company has the province system test bench 1 bureau of standardmeasurement, homemade test-bed 3 units, production of products from rawmaterials into finished goods factory implements the whole process ofdetection.Product factory qualified rate ***, have strong ability ofcomprehensive manufacturing.Physical and chemical laboratory, length measuringroom is the national metrological confirmation unit, make our products from rawmaterials into finished goods factory implements the whole process ofdetection.Product factory qualified rate ***, have strong comprehensivemanufacturing capacity, company can produce all kinds of pump in more than 6000units.
运费说明:
1.本公司常规产品1-3天发货,特殊要求或者需定做的产品发货时间已与客户协商为准, 2.泵运费方式有两种:快递和物流.小泵和小型配件发快递,其余体积较大,数量较多,推荐走专线物流货运,一般南方,中部地区及沿海地区3-5天左右到达.西部,北部较远的地区以及少数二次中转地区5-8天左右可到,具体覆盖范围请咨询公司客服人员.安装使用:请您根据产品说明书的步骤进行操作,如有问题,请联系我公司,我公司将会请***的技术人员为您提供服务.为了保护您的利益,我们已经提醒客户在收到货物时,要开箱验货,如在打开验货时发现货物丢失,损害或者不符,请拒绝签收,您签收就代表已准确无误的收到后屋,若在签收货物之后才发现货物丢失或者不符,如不负责. 客户收到货后,产品无法安装或者规格有误,本公司提供退货或者换货服务,退货或者换货的客户请***货物的完好无损,并承担往返运费. 客户收到后,如果产品存在质量问题,请在收货后7天内联系我公司,提供相关质量问题图片,我公司将在时间给您退货或者换货,因为我公司已经在发货前已经仔细检查过,所以过期将不提供此项服务,还请谅解.Shippingdetails:1. Our regular products 1-3 days of delivery, special requests or needto custom-made product delivery time is already negotiate with customer, 2. Thepump freight way has two kinds: express and logistics. Small pump and smallaccessories send express, the rest of the volume is larger, the number is more,recommend special line logistics, freight, generally south, central and coastalarea about 3 to 5 days to arrive. In the west, north of remote areas and areasinhabited by minority secondary transit, about five to eight days to specificcoverage please consulting company customer service staff. Install and use,please according to the product manual steps, if any problem, please contactour company, we advise you that we will be the most professional and technicalpersonnel to provide service for you. In order to protect your interests, whenwe have to remind the customer receive the goods, unpacking inspection, such aswhen open the inspection found that the goods lost, damage or discrepancy,please refuse to sign after receiving STH, you sign after receiving STH meanshave accurate received after the house, if after receipt of goods found thegoods didn't agree lost or, if not responsible. Customers after receiving thegoods, the product can't install or specification is wrong, the companyprovides the return or exchange service, return or exchange the customersplease make sure that the goods are intact, and bear the freight back andforth. The receipt of the customer, if the product quality problems, pleasecontact me within 7 days after receiving the company, provide relevant qualityproblem photos, our company will give you a refund or a replacement in thefirst time, because I already have carefully checked before shipment, so latewill not provide this service, also please understand.
河北远东泵业制造有限公司坐落于铸造名乡—河北省泊头市。公司占地面积38650平方米,建筑面积20300平方米,是国内***的集设计、铸造、生产、销售、服务于一体的容积泵专业制造厂家。公司始建于1984年,有二十几年专业研制经验。目前产品设计采用国际***水平实体设计软件;产品研发、制造、检验、交付按照***质量管理体系控制过程质量;产品制造广泛使用加工中心、数控机床、专用精机、高精设备;检测设备拥有万能工具显微镜、渐开线检测仪、光学投影仪、万能测齿仪、脉冲辉光离子氮化炉等大型检测设备,并建有国家B级试验站。本厂以***的产品水平、优质的售后服务、恪守信用而在市场上倍受欢迎,产品***不衰,赢得了用户的普遍赞誉。公司已通过***:2000国际质量体系认证,中国船级社CCS型式认证,法国船级社BV产品工厂认证,美国船级社ABS产品质量认证,中国渔业船舶检验局船用泵认证,成为中石油物资资源市场成员、中石化物资资源市场成员。河北省知名产品生产企业,船用泵产品承制企业。
点击查看>| 企业类型 | 有限责任公司 | 注册资本 | 2000万人民币 |
| 公司注册地址 | 河北省泊头市道东街88号 | 统一社会信用代码 | 130981000004590 |
| 登记机关 | 泊头市工商管理所 | 法定代表人 | 蔡文福 |
| 公司成立日期 | 2003-09-19 | 营业期限 | 30 |
| 经营范围 | 生产和销售各种泵 铸件加工 | ||



