摩力士Molyslip ADF二硫化钼抗磨液

摩力士Molyslip ADF二硫化钼抗磨液是一种高纯的二硫化钼涂层，可以空气当中干燥固化。用于一些润滑油润滑脂不能使用的地方，例如灰尘比较多，还有齿轮或者导轨的预涂处理。

GENERAL DESCRIPTION:
MOLYSLIP ADF (Air Drying Film) is pure molybdenum disulphide in an air drying, bonding
resinate for spray or brush application. It provides lubrication where oils and greases cannot be
used, e.g. where there is danger of dust contamination, and is excellent for the pre-treatment of
parts such as gears and slides before assembly. It is also ideal for the lubrication of small
mechanisms.

PERFORMANCE AND USAGE:
MOLYSLIP ADF is ideal for pre-assembly treatment. The film prevents scuffing during the initial
stages of running-in new components. After assembly it provides exceptional, longlasting
lubrication which gives a considerable reduction in wear and consequently lengthens the life of a
component.

EXTRA INFORMATION:
It is essential that all parts are thoroughly clean, dry and free from oil when MOLYSLIP ADF is
applied to ensure a good bond. The sub-micron particle size of the molybdenum disulphide used
in this product (average 0.5 micron) makes it possible to apply an extremely thin film which will
not interfere with normal assembly tolerances. If components are to be stored before use,
treatment with MOLYSLIP ADF will inhibit corrosion during the indoor storage period and
provide immediate lubrication when they are put into use.

TECHNICAL DATA:
Specific Gravity at 15°C Bulk 0.965
Aerosol 0.835
Pour Point (Cold Test) -22°C
Boiling Point 121°C
Operating Temperature up to 280°C