| 加工定制:是 | 品牌:日本KYOWA | 型号:PHB-A-2MP |
| 种类:压力 | 制作工艺:厚膜 | 输出信号:模拟型 |
| 材料:聚合物 | 材料物理性质:半导体 | 材料晶体结构:多晶 |
| 防护等级:IP68 | 线性度:1.05 | 迟滞:0.0514 |
| 重复性:0.051 | 灵敏度:0.05 | 漂移:118.015 |
| 分辨率:10.154 | 最小包装数:15215 | 订货号:45 |
| 物料编号:4548 |
日本KYOWA压力传感器PHB-A-2MP PHB-A-5MP
The PHB-A is a pressure transducer for measuring pressure at high or low temperatures. The sensing surface is a stainless steel diaphragm.
Rated Capacity: 1 to 50 MPa
Compensated Temperature: -196 to 200?C
日本KYOWA压力传感器PHB-A-2MP PHB-A-5MP
Performance
Rated Capacity 1 MPa
Nonlinearity Within ±0.4%RO
Hysteresis Within ±0.4%RO
Rated Output 2.2 mV/V ±15%
Environmental Characteristics
Safe Temperature -196 to 210?C (-25 to 80?C with a connector plug)
Compensated Temperature -196 to 200?C (-25 to 80?C with a connector plug)
Temperature Effect on Zero Within ±0.03%RO/?C
Temperature Effect on Output ±0.035%/?C以内
Electrical Characteristics
Safe Excitation 15 V AC or DC
Recommended Excitation 1 to 10 V AC or DC
Input Resistance 350 Ω±2%
Output Resistance 350 Ω±2%
Cable 4-conductor (0.3 mm2) fluoroplastic shielded cable, 5 mm diameter by 3 m long, terminated with a connector plug PRC03-12A10-7M
(Shield is not connected to the case.)
Mechanical Properties
Safe Overload 120%
Natural Frequencies Approx. 8 kHz
Weight Approx. 230 g (Excluding cables)
Material Case: SUS metallic finish; Liquid-contacting part: SUS 630
Mounting Screw G3/8, male
Degree of Protection IP51 (IEC 60529)
日本KYOWA压力传感器PHB-A-2MP PHB-A-5MP
| 企业类型 | 有限责任公司(自然人独资) | 注册资本 | 10.00万人民币 |
| 公司注册地址 | 深圳市宝安区沙井街道步涌二路16号同富雅苑二单元180D | 统一社会信用代码 | 914403003498032874 |
| 登记机关 | 深圳市市场监督管理局 | 法定代表人 | 朱利 |
| 公司成立日期 | 2015-07-27 | 营业期限 | 2015-07-27 至 无固定期限 |
| 经营范围 | 传感器、仪器仪表、应变计、盾构配件及电子精密元件的销售,国内贸易、货物及技术进出口。(法律、行政法规或者国务院决定禁止和规定在登记前须经批准的项目除外)^ | ||




