您好,欢迎来到推发网 最新产品
SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀
产品标签 | 

蒸汽减压阀

价    格

订货量

  • ¥2500.00

    ≥1个

吕先生销售经理
  • 邮箱已验证
  • 手机已验证
𐂳𐂴𐂵 𐂴𐂵𐂶𐂷 𐂸𐂹𐂳𐂵 𐂳𐂺𐂻𐂺𐂸𐂶𐂶𐂼𐂴𐂵𐂻
  • 发货地浙江 永嘉县
  • 发货期限不限
  • 供货总量100个
产品推荐
品牌:斯派莎克型号:疏水阀材质:铸铁
形态:蝶式连接形式:法兰驱动方式:手动
流动方向:单向零部件及配件:配件外形:大型
标准:国标压力环境:高压工作温度:高温
适用介质:氨气规格:100
SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀通过对同一主阀、不同型号异阀的多元化组合,可***控制蒸汽温度和/或压力。

     斯派莎克25P系列减压阀的设计制造完全依据使用者的需求,其多元化的组合在工***没有任何其他的减压阀可与之媲美。为了实现多目标控制设备的独立性和经济性,可在同一个主阀上组合多种控制,无论是温度控制、压力调节还是二者在一起,都能做到反应迅速、控制***、***。

     同时,25P系列减压阀的所有零件均能够分解检查或保养,而无需移动管路中的主阀体。正确的选型和安装保养,更能***其长期无故障的工作。

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀工作原理

     启动前导阀弹簧处于自由状态时,主阀和导阀处于关闭状态。导阀有弹簧力作用打开,蒸汽经由导阀进入主隔膜室,一部分蒸汽则经由控制孔流出,当导阀流入的蒸汽大于由控制孔流出的蒸汽,主隔膜阀中的控制压力增大,打开主阀。随着蒸汽流过主阀,下游压力的增量经由感应管反馈,作用在导阀隔膜下,平衡隔膜上部的弹簧压力,使导阀组建关闭节流,维持主隔膜中的压力,控制主阀开度输送适量的蒸汽。调节导阀隔膜上的弹簧即可改变下游压力。

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀主要特征

             导阀弹簧:三种颜色的弹簧,可提供从0.2-14bar g范围内不同压力的准确控制。

           温度调节刻度盘:快速准确的设定所需温度。

           温度感应器:在温控元件中有无需补偿的液体,感应瞬时温度的变化,提供准确的控制。

           ***的测试:每一个25P系列的减压阀在出厂前都经蒸汽测试,以确保无故障的操作

 

Many reducing valve problems are caused by the presence of moisture or dirt. A steam separator and strainer with fine mesh screen, if fitted before the valve, will help to prevent such problems. The strainer is fitted on its side to prevent the body filling with water and to ensure that the full area of the screen is effective. Large ***lation valves will also benefit from being installed on their side for the same reason.

All upstream and downstream pipework and fittings must be adequately sized to ensure that the only appreciable pressure drop occurs across the reducing valve itself. If the ***lating valves are the same size as the reducing valve connections, they will incur a larger pressure drop than if they are sized to match the correctly sized, larger diameters of the upstream and downstream pipework.

If the downstream pipework or any connected plant is incapable of withstanding the maximum possible upstream pressure, then a safety valve or relief valve must be fitted on the downstream side. This valve should be set at, or below, the maximum allowable working pressure of the equipment, but with a sufficient margin above its normal operating pressure. It must be capable of handling the full volume of steam that could pass through the fully open reducing valve, at the maximum possible upstream pressure.

Pilot operation also allows the reducing valve to be relatively compact compared to other valves of similar capacity and accuracy, and allows a variety of control options, such as on-off operation, dual pressure control, pressure and temperature control, pressure reducing and surplussing control, and remote manual adjustment. Three of these variations can be seen in Figure 7.3.6.

Direct acting and pilot-operated control valves can be used to control either upstream or downstream pressures. Pressure maintaining valves (and surplussing valves) sense upstream pressure, while pressure reducing valves sense downstream pressure.

 


DP17/DP17G导阀型隔膜式减压阀在普通减压阀的基础上做了很大的改进。膜片采用了新型材料,并大大加工了工作面积,因此阀门上游压力或下游负荷细微的变化都能及时准确的反馈到主阀膜片,来调节主阀的开度,确保下游压力的稳定。 

  本产品的另一个突出的特点为:同一个阀体上可安装和互换多个导阀在稳压的同时,实现温度控制、上游压力的控制、远程的开关控制等。 

 

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀主要技术参数:

公称压力

 PN25

PMA***允许压力

 25bar g @ 120℃

TMA***允许温度

 232℃

TMI***允许温度

 -10℃

PMO***工作压力*

 17bar g

TMO***工作温度

DP17 232℃

DP17G120℃

TMIO***工作温度

  0℃

出口压力范围(barg)

  0.2-1.7

***冷态测试压力

 38bar g

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀主要材料

 

DN

15

20

25

32

40

50

65

80

100

125

150

Cv

2.8

5.5

8.1

12.0

17.0

28.0

45.5

60.1

93.3

146

186

 

 

SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀流量系数(Cv)

零件名称

零件材料

阀体 阀盖

WCB

阀座

2Cr13

阀瓣

2Cr13

阀杆

2Cr13

膜片

316

调节弹簧

60Si2Mn

主阀弹簧

50CrVA

 

供应商信息
公司图片
温州闽嘉阀门有限公司 进入首页

闽嘉阀门为您服务:15858042918 王工 13732006587 叶工 阀门-精品阀门-优质工程阀门-不锈钢阀门,MJV/温州闽嘉阀门为您提供非标量身定制, MJV/温州闽嘉阀门有限公司是国内专业的不锈钢法兰闸阀,不锈钢法兰球阀,不锈钢法兰截止阀,不锈钢法兰止回阀,不锈钢蝶阀,不锈钢阀门,非标特种阀门,特殊合金阀门企业,我们致力于为用户提供高品质阀门 闽嘉总部位于泵阀之乡温州瓯北三桥工业区新河路296号, 温州闽嘉阀门有限公司是一家科技型,拥有核心技术,服务型的阀门制造商和管道方案设计解决专家,闽字牌“闽嘉阀”自主品牌,我们立足于为用户提供高品质、高性价比的产品和优质服务,努力降低用户采购成本,一站式服务,解决用户采购烦恼,闽嘉阀欢迎广大客户来电来厂指导。 闽嘉阀门为您服务:15858042918 王工 13732006587 叶工

点击查看>
企业类型 有限责任公司 注册资本 8500.00万人民币
公司注册地址 永嘉县江北街道新桥村新河路296号 统一社会信用代码 91330324096091188P
登记机关 永嘉县市场监督管理局 法定代表人 吕佳俊
公司成立日期 2014-03-28 营业期限 2014年03月28日 至 2024年03月27日
经营范围 阀门、水泵制造、加工、销售;铜管、金属材料、管道设备、液压气动元件、电器设备、机械配件、通讯设备(不含卫星地面接收设施和无线广播电视反射设备)及配件、消防设备、五金交电、电线电缆、橡塑制品销售;管道设备安装服务;货物与技术进出口。
联系方式
联系人
吕先生微信
𐂳𐂴𐂵 𐂴𐂵𐂶𐂷 𐂸𐂹𐂳𐂵
温州闽嘉阀门有限公司
  • 电       话 𐂳𐂺𐂻𐂺𐂸𐂶𐂶𐂼𐂴𐂵𐂻
  • 传       真 𐂶𐂴𐂻𐂻𐂽𐂼𐂻𐂺𐂴𐂺𐂴𐂻𐂴
  • 地       址 浙江 温州 永嘉县 15858042918
  • 免责声明 :

    本页面所展现的SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀信息及其他相关推荐信息,均来源于其对应的商铺,信息的真实性、准确性和合法性由该信息的来源商铺所属企业完全负责。推发网对此不承担任何保证责任。

  • 友情提醒 :

    建议您在购买相关产品前务必确认供应商资质及产品质量,过低的价格有可能是虚假信息,请谨慎对待,谨防欺诈行为。

温州闽嘉阀门有限公司 在线留言
本页信息为温州闽嘉阀门有限公司为您提供的"SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀"产品信息,如您想了解更多关于"SpiraxSarco 25P蒸汽减压阀 SpiraxSarco蒸汽减压阀"价格、型号、厂家请联系厂家,或给厂家留言。 进入店铺 在线留言