产品特性:混料均匀 | 应用领域:化工 | 物料类型:粉体 |
适用物料:化工 | 动力类型:电动 | 工作方式:扩散混合机 |
料筒运动方式:二维 | 品牌:鑫宝 | 结构形式:圆筒混合机 |
产品类型:全新 | 型号:XB-301 | 布局形式:卧式 |
最大装料量:2000Kg | 每次处理量范围:1000以上千克 | 生产能力:1000Kg/次 |
外形尺寸(长*宽*高):1800*1100*2500mm | 整机重量:800Kg | 物料粒度:400目 |
卸料方式:球阀出料 | 规格:XB-201J |
Application
螺带混合机一般用于粘性或有凝聚性的粉粒体的混合以及粉粒体中添加液体及糊状物料的混合,同时由于粘性物料清洗困难的特点,适用于产量大、不经常更换品种的场合混合。卧式螺带混合机广泛适用于化工、医药、复合肥、染料、颜料、橡胶、建材、食品、奶粉、保健品、饲料、添加剂、养殖业、生物工程、精细化工、陶瓷、耐火材料、稀土、塑料玻璃以及新材料、核能材料等行业的固-固(即粉体与粉体)、固-浆(即粉体与浆体)的物料混合。
The ribbon mixer is generally used to mix sticky or agglomerate powder material or powder material with liquid and slurry material. Considering the difficulty in cleaning the sticky material, the equipment is also suitable for big production capacity and the occasion where the material doesn’t often change. The mixer is widely used in the following sections: chemical, pharmacy, compound fertilizer, dyestuff, pigment, rubber, construction material, foodstuff, milk powder, health products, feedstuff, additives, livestock breeding, biological engineering, fine chemical, ceramics and so on. It is mainly aim to mixer powder and powder material or powder and liquid material.
II. 特点 Features
1.混合速度快,能满足原料存在各种物理性质在混合时的苛刻要求;fast mixing 2.正反螺带主轴在水平位置,形成高效的搅拌机环境;efficient mixing
3.运转平稳、性能稳定、维护简便;stable and easy maintenance
4.在具备一定比例的内外螺带在接近于临界转速下混合;mixing at critical speed
5.卧式机身便于安装,适应多数厂房结构。Easy installation
III.工作原理 Working principle
该机型由容器、螺旋搅拌叶片和传动部件组成:螺旋叶片一般做成双层或
三层,外层螺旋将物料从两侧向中央汇集,内层螺旋将物料从中央两侧输送,形成对流混合。
The mixer consists of container, helix mixing blade and transmission parts. The helix blade is usually designed into double layer or three layers. The outer ribbon will make the material from both sides gather in the center while the inner ribbon will make the material from the center feed in the sides. This can form counter current mixing.
公司发货图: