| 是否进口:否 | 品牌:heraeus | 型号:F645 SA30C5-89M40 |
| 粘度:160Pa·S | 颗粒度:20-38um |
*D = Dispense grade M = Print grade H = Print grade, high L = Dipping/Jetting grade, Low
Product Code Powder Properties
Paste Alloy Metal Content *Viscosity Powder Type Particle Size Alloy Melting Point
F645 Sn/Ag3/Cu0.5 89% M 4 20 鈥� 38 碌m Sn96.5/Ag3/Cu0.5 217 掳C
Halogen-Zero (No halogen added in the flux) Tolerances: Halogen <50 ppm; measured according to BS EN 14582
Activity Level (J-STD 004)
*** 9454-1 {DIN EN 29454-1}
Classification REL0 1.2.3.C No Clean/ Solvent Clean
Product Code and Alloy
F645 SA30C5-89M40 solder paste is a state-ofthe-art halogen-free lead free no clean solder paste that promotes wetting and minimises soldering defects. Extensive testing at customer locations has proven this paste to be capable of defect-free performance in the production environment.
飩� Exceptional print to print consistency 飩� Outstanding wetting
Flux Activity Halogen Content
飩� Printing
Description Key Benefits
Applications
飩� Flux SF 64 Compliant Products
Technical Data Sheet
Heraeus Electronics Heraeus Deutschland GmbH & Co. KG Heraeusstra脽e 12 鈥� 14 63450 Hanau, Germany www.heraeus-electronics.com
Asia Pacific Phone +65 6571 7677 electronics.apac@heraeus.com
China Phone +86 21 3357 5457 electronics.china@heraeus.com
Europe, Middle East and Africa Phone +49 6181 35 3069, +49 6181 35 3627 electronics.emea@heraeus.com
The descriptions and engineering data shown here have been compiled by Heraeus using commonly-accepted procedures, in conjunction with modern testing equipment, and have been compiled as according to the latest factual knowledge in our possession. The information was up-to date on the date this document was printed (latest versions can always be supplied upon request). Although the data is considered accurate, we cannot guarantee accuracy, the results obtained from its use, or any patent infringement resulting from its use (unless this is contractually and explicitly agreed in writing, in advance). The data is supplied on the condition that the user shall conduct tests to determine materials suitability for particular application.
Americas Phone +1 610 825 6050 electronics.americas@heraeus.com
Recommended Profile Average Ramp Rate 1 鈥� 3 掳C/s
Peak Temperature
15 掳C (min) 鈥� 40 掳C (max) above Melting Temperature Time above liquidus 45 鈥� 90 s Reflow Atmosphere
Type 3 鈥� 5
Reflow in Air or in N2 with <2000 ppm O2
After reflow flux residues may remain on the circuit and do not need to be washed. For cleaning of wet paste or if desired for cleaning of flux residues Zestron and Vigon cleaners can be used 鈥� see separate cleaning d ti
Recommended Reflow Profile
Storage Paste Preparation
Cleaning Instructions
飩� Store the solder paste in tightly-sealed containers and avoid exposure to sunlight and high humidity 飩� Max expiration date: please refer to the expiry date on the label of the packaged product 飩� Storage condition in the refrigerator at 2 10 掳C 飩� Store cartridges with tip pointing downwards
飩� Remove paste from fridge: Before opening the package, leave paste for at least 4 hours (depending on jar/ cartridge size) at room temperature, so that paste warms up 飩� Do not open jar/cartridge while paste is cold to prevent condensation 飩� Do not heat the paste beyond room temperature 飩� Before using of paste jar: To obtain uniform, stable viscosity stir paste for 1 to 2 min, using a stainless steel or chemically resistive plastic spatula 飩� For further information see Technical Information
The
| 企业类型 | 私营合伙企业 | 注册资本 | 100.00万人民币 | ||
| 公司注册地址 | 2002 | 统一社会信用代码 | 913101147476005499 | ||
| 法定代表人 | 张羽 | 公司成立日期 | 2002-03-20 | ||

