上海宝缘钢铁有限公司(上海宝缘金属材料有限公司）是上海宝钢和上海材料研究所的技术协作单位。

我司专业从事研究、生产、销售不锈钢镍合金材料。包括变形高温合金、哈氏合金、英科耐尔合金、因科洛伊合金、蒙乃尔合金、特殊不锈钢、耐蚀合金等特种不锈钢、合金钢材料。

我司可供应管材、棒材、板材、锻件、·
法兰、丝材、带材、管件等等。

Introduction

Hastelloy?alloy G-30 (UNS N06030) is a high chromium nickel-base alloy which shows superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acids as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulphuric acids.

The resistance of alloy G-30 to the formation of grain boundary precipitates in the heat-affected zone makes it suitable for use in most chemical process applications in the as-welded condition.

Chemical Composition (%)

Corrosion Resistance

Physical Properties

Mechanical Properties

(Plate, 6.4 mm (0.250 in.) thick)
(Room Temperature)
(Solution heat-treated at 1177癈, rapid air cooled or water quenched)

Fabrication

Heat Treatment

Wrought forms of alloy G-30 are furnished in the solution heat-treated condition unless otherwise specified. The standard solution, heat-treatment consists of heating to 1177癈 (2150癋) followed by rapid air-cooling or water quenching. Parts that have been hot formed should be solution heat-treated prior to final fabrication or installation.

Forming

Alloy G-30 has excellent forming characteristics and cold forming is the preferred method of forming. Because of its good ductility, it can be easily cold-worked. The alloy is generally stiffer than the austenitic stainless steels. Therefore, more energy is required during cold forming.

Welding

Alloy G-30 is readily welded by Gas Tungsten Arc (GTAW), Gas Metal-Arc (GMAW) and Shielded Metal-Arc (covered electrodes), welding techniques. Its welding characteristics are similar to those for Hastelloy alloy G-3. Submerged-Arc welding is not recommended as this process is characterized by hih heat input to the base metal and slow cooling of the weld.

The joint surface and adjacent area should be thoroughly cleaned before welding. All grease, oil, crayon marks, sulphur compounds and other foreign matter should be removed.

Matching composition filler metal is recommended for joining alloy G-30. For gas-tungsten-arc and gas-metal-arc welding, Hastelloy alloy G-30 filler wire (ER NiCrMo-11; UNS N06030) is suggested. For shielded-metal-arc welding, alloy G-30 covered electrodes (E NiCrMo-11; UNS W86030) are suggested.

联系方式：

联系人：罗经理

手机： 13671561267

电话： 021-54461707/021-54192998-618

传真： 021-54192997

QQ： 279851675

邮箱： 279851675@qq.com