| 品牌:Panasonic/松下 | 加工定制:是 | 类型:风冷式冷水机 |
| 型号:X-01A | 结构类型:密封式 | 标准制冷量:2.95kWkw |
| 输入功率:1.32kWkw | 外形尺寸:600*400*900 | 重量:62kgkg |
| 规格:1匹 | 产品特性:制冷 |
教您选购冷水机 :
▲非启停式的制冷机其实是控制制冷机内冷媒流向来控制制冷循环水的温度。按照制冷机的制造原理,一共分为2种控制方式,在5度以内采用冷媒流向的控制方式,使制冷机可以***控制温度在正负0.1度,在5度以外采用压缩机启停方式,使制冷机在不需要强烈制冷的情况下节能工作。基于制冷机的工作方式,对于制冷机的制冷精度要求基本上可以满足(精度要求高的可以采用冷媒流向的控制方式)。剩下来就是制冷功率和水泵的选型要求了,只要考虑了具体的发热量,就可以选用不同制冷量的制冷机,然后再看水泵的扬程和流量需求,选择不同的水泵。这样就可以找到合适的制冷机了。
▲Non start stop type refrigerator is to control the refrigerant flow in the refrigerator to control the temperature of the cooling water. According to the principle of the refrigerator, is divided into 2 kinds of control mode, control mode using the coolant flow direction within 5 degrees, the cooling machine can accurately control the temperature in the positive and negative 0.1 degrees, 5 degrees in the outside of the compressor start stop mode, the cooling machine without the need for such work under the condition of strong cooling. Based on the working mode of the refrigerator, the refrigeration precision requirement of the refrigerator can basically meet the requirements of high precision and can be controlled by the refrigerant flow direction. The rest is the selection of refrigeration power and pump requirements, as long as the account heat specific, refrigeration machine can choose different cooling capacity, and then look at the pump head and flow requirements, choose a different pump. So we can find the right refrigerator.
产品简介:
▲ :采用多个压缩机并联使用。每个压缩机自带一个独立的制冷回路。即蒸发器、冷凝器也完全独立;所有压缩机由统一的微电脑控制系统指挥,逐个开、关机,相互之间绝不会相互干扰,加上该品牌机全部采用原装***制作,单机故障率极低,综合以上原因,可以***该系列机有着高度稳定的性能,在长年连续运行情况下之,而无需再购其它备用机。
▲ Performance and stability: the use of multiple parallel compressors,each compressor comes with a separate cooling circuit that is the evaporator and condenser are completely independent; all compressor microcomputer control system by the unified command, to open one by one, off each other will not interfere with each other between, plus the original authentic brand of machine used in all production stand-alone failure rate is very low,the above reasons,we can ensure that the machine has a series of highly stable performance,long years of continuous operation in case the first choice, without having to repurchase another spare machine.
▲ 省电节能:采用多个中小功率压缩机并联使用,开、关机时对电网的干扰极小,随着负荷的变化,机组便自动确定开机的数量,***开启的压缩机处于工作状态,从而有效节约电能。
▲ Energy saving: The number of small and medium power compressors used in parallel, open, shut down the grid when the minimum interference with the load changes, the unit will automatically determine the amount of power to ensure the open state of the compressor work in the most short-tailed bird effectively save energy.
▲ 使用寿命长:蒸发器、冷凝器设计非常合理,并且置于压缩机上方,在整个运行过程中,绝大部分润滑油始终停留在压缩机内,***压缩机的良好润滑。
▲ Long life: evaporator, condenser design is very reasonable, and placed in the top of the compressor, the entire run, the vast majority of oil within the compressor has stopped faint, to ensure good lubrication of the compressor
旭讯机械(苏州)有限公司,专业从事温度控制行业已有10多年的经验,为了能更好的满足客户的需求,分别于2004年,2006年,2010年,2012年在在中国的深圳,苏州,天津,重庆成立四家制造工厂,总员工1300余人,同时也是中国模温机生产产量服务范围***的模温机制造企业。旭讯公司自成立以来在工业温度控制界具有丰富的实战经验,也是国内一家专一生产温度控制设备的企业,并和国外数家专业知名模温机制造厂保持着长期的战略合作伙伴关系,同时也得到***和使用者的一致认可。旗下旭讯系列主要产品有:模温机、导热油炉、电加热导热油炉、导热油加热器、导热油电加热器、油加热器、电升温油加热器、油温机、水温机、水加热器、模具恒温机、成型专用模温机、橡胶(塑料)机械模温机、沥青油加热器、电缆挤出专用模温机、 镁、铝合金压铸专用模温机、辊轮控温专用模温机、油循环温度控制机、水循环温度控制机、冷冻机! 为了更好的服务到各行业的用户,我们的工程师还开发出针对不同行业的专用机器,如DVD光盘成型专用模温机、橡胶(塑料)机械专用模温机、电缆挤出专用模温机、 镁、铝合金压铸专用模温机、滚轮控温专用模温机、RHCM高光无痕冷热成型专用模温机,总之我们所设计的每个系统都是为了满足您最重要的需求
点击查看>| 企业类型 | 有限责任公司(自然人投资或控股) | 注册资本 | 1000.00万人民币 |
| 公司注册地址 | 昆山市玉山镇龙生路268号3号房 | 统一社会信用代码 | 91320583MA1NMJQL9G |
| 登记机关 | 昆山市行政审批局 | 法定代表人 | 商旭 |
| 公司成立日期 | 2017-03-24 | 营业期限 | 2017-03-24 至 2067-03-23 |
| 经营范围 | 冷冻机械设备、模具控温机、冷水机、恒温恒湿机、注塑机辅机、机电设备及配件的技术开发、销售;金属制品加工、销售;节能环保设备研发、设计及销售;节能环保工程的施工;货物及技术的进出口业务。(依法须经批准的项目,经相关部门批准后方可开展经营活动) 一般项目:通用设备制造(不含特种设备制造);专用设备制造(不含许可类专业设备制造)(除依法须经批准的项目外,凭营业执照依法自主开展经营活动) | ||


