| 题材:科学技术 | 书名:进口正版《AWS A5.32M/A5.32-2021 Welding Consumables—Gas | 作者:AWS |
| 出版社:AWS | 书号:- | 正文语种:英文 |
| 页数:40 |
Description / Abstract:
AWS A5.32M/A5.32, 3rd Edition, 2021 - Welding Consumables—Gases and Gas Mixtures for Fusion Welding and Allied Processes
This standard specifies requirements for the classification of gases and gas mixtures that chemically shield or chemically react with the filler material, base metal, and weld metal, and are used in fusion welding and allied processes including, but not limited to:
(1) gas tungsten arc welding—GTAW
(2) gas metal arc welding—GMAW
(3) flux cored arc welding—FCAW
(4) plasma arc welding—PAW
(5) plasma arc cutting—PAC
(6) plasma arc gouging—PAG
(7) laser beam welding—LBW
(8) laser beam cutting—LBC
(9) arc braze welding—ABW
(10) electrogas welding—EGW
The purpose of this standard is to classify and designate these gases and gas mixtures in accordance with their chemical properties and metallurgical behavior as the basis for correct selection by the user and to simplify the possible qualification procedures. The modes of application for gas shielded welding processes include, but are not limited to: manual, semiautomatic, mechanized, and automatic weld methods.
Gas purities and mixing tolerances are specified as delivered by the supplier (manufacturer) and not at the point of use.
Gases or gas mixtures may be supplied in either liquid or gaseous form, but when used for welding and allied processes, the gases are always used in the gaseous form.
Fuel gases, such as acetylene, natural gas, propane, etc., and resonator gases, as used in gas lasers, are not covered by this standard.
Transportation and handling of gases and containers shall be in accordance with local, national, and regional standards and regulations as required.
The gases covered by this specification are classified using a system that is independent of U.S. Customary Units and the International System of Units (SI). Classification is according to the composition of the gas or gas mixture.
Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health information can be found in Annex Clauses A5 and A8.
Safety and health information is available from the following sources:
American Welding Society:
(1) ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes
(2) AWS Safety and Health Fact Sheets
(3) Other safety and health information on the AWS website
Material or Equipment Manufacturers:
(1) Safety Data Sheets supplied by materials manufacturers
(2) Operating Manuals supplied by equipment manufacturers
Applicable Regulatory Agencies
Work performed in accordance with this standard may involve the use of materials that have been deemed hazardous and may involve operations or equipment that may cause injury or death. This standard does not purport to address all safety and health risks that may be encountered. The user of this standard should establish an appropriate safety program to address such risks as well as to meet applicable regulatory requirements. ANSI Z49.1 should be considered when developing the safety program.
Product Details:
Revision: 3rd Edition, 2021
Published Date: January 2021
Status: Active, Most Current
Document Language: English
Published By: American Welding Society, Inc. (AWS)
Page Count: 40
北京中普科标图书有限责任公司于2007年4月在北京成立。与各国标准组织及IHS建立了长期稳定的 合作关系,主要为企事业单位、大专院校、科研院所、提供服务。本公司遵循“公开、公平、公正和诚信”原则,为客户提供专业的标准化信息服务工作,主要为各企业提供美国ANSI EIA SAE IPC API ,ASME,ASTM,AWS,AMS,UL,IEEE 等百余组织;及CEN欧洲:BS 英国,DIN 德国,NF 法国;AS/NZS 澳洲;JIS日本;NF法国...等国所出标准及技术刊物。 北京中普科标图书有限责任公司 工作时间:星期一~星期五 早:9:00至晚5:30 京ICP备11006165号 / 京公网安备11011502002443
点击查看>| 企业类型 | 有限责任公司 | 注册资本 | 500.00万人民币 |
| 公司注册地址 | 北京市大兴经济开发区新媒体产业基地金辅路8号1号楼303室 | 统一社会信用代码 | 91110115661555791X |
| 登记机关 | 北京市工商局大兴分局 | 法定代表人 | 王新伟 |
| 公司成立日期 | 2007-04-25 | 营业期限 | 2027-4-24 |
| 经营范围 | 出版物零售,信息咨询,翻译服务 | ||
-
身份验证
- 营业执照已上传
- 邮箱已验证
- 手机已验证
- 微信已验证
-
经营模式
商业服务
-
注册资本
500.00万人民币
-
企业类型
有限责任公司
- 主营产品
-
公司地址
北京 大兴区 经济技术开发区金辅路8号


