ADI12-8（FIT）GY

模拟量输入 F&eIT I/O模块 / 8ch(12bit 33.3ks/s) / 总线隔离

This product can change an external analog voltage signal into digitized data. It connects with the controller module of F&eIT series, and a system can be built, or it can connect with ADI12-8(USB) GY, and an input channel can be added. Moreover, since CPU which controls an external signal and a module is ***lated with the digital ***lator, it does not have electric influence of external on a host computer as it is.

• 
  

• An input range is common to a channel and can be chosen from four kinds in all of input range unipolar and bipolar.

• 
  

• Since it corresponds to the differential input, even if distance with the source of a signal is long and potential difference arises again, an exact voltage value is measurable.

• 
  

• Device ID can be set up with a rotary switch and apparatus number management is easy.

• 
  

• A special tool was not needed but wiring has adopted the easy screw-less connector plug.

• 
  

• This module is equipped standardly with 35mmDIN rail attachment mechanism. Moreover, the connection with a controller unit is an easy and smart side stack system.