ADV151-P50/D5A00

ADV151-P50/D5A00

本指南涵盖了可以安装在ESB中的数字I/O模块(FIO)的硬件规范

总线节点单元(ANB10S、ANB10D)、光ESB总线节点单元(ANB11S、ANB11D)和现场控制单元

(afv30s, afv30d, afv40s, afv40d)。

n标准规格

l数字输入模块

数字输入模块接收32路或64路24v DC开/关信号。

ADV151和ADV161支持双冗余配置。

项规范

ADV151-P/ADV151-E (*1

输入通道数32 64

额定输入电压(*2)24v DC(汇/源)24v DC(汇/源)

输入ON电压18 ~ 26.4 V DC 20 ~ 26.4 V DC

输入OFF电压≤5.0 V DC≤5.0 V DC

输入电流(额定输入电压下)4.1 mA±20% /通道2.5 mA±20% /通道

允许输入电压30.0 V DC 30.0 V DC

输入信号与系统之间的耐压:2kv交流，持续1分钟

共路间:500v AC，每16路共路1分钟(*3)

功能

状态输入检测功能

开/关状态

检测功能

开/关状态

按钮输入按钮边缘计数功能按钮边缘计数功能

SOE input捕获SOE数据的功能

输入响应时间小于等于8毫秒(对于状态输入)

最小ON检测时间20ms(按钮输入)

开/关周期25hz(用于按钮输入)

电流消耗500ma (5v DC) 550 mA (5v DC)

重量约0.30 kg

外部连接

压钳端子，

专用电缆(AKB331);

MIL连接器电缆

专用电缆(AKB337);

MIL连接器电缆

*1:不支持在ER总线节点单元中安装ADV151-E。

*2:每16通道共用ADV151和ADV161。所有待连接的电压输入信号(24v DC)必须在

相同的极性。

*3:使用专用电缆的耐压电压为500v AC(输入信号与系统之间)。

MIL连接器电缆的耐压取决于其电缆的电气规格

l Digital Output Modules

The Digital Output Modules output 32-channel or 64-channel transistor contact signals.

The ADV551 and ADV561 can be used in dual redundant configuration.

Item Specifications

Model ADV551 ADV561

Number of output channels 32 64

Rated applied voltage 24 V DC 24 V DC

Load voltage 24 V DC, 50 mA 24 V DC, 100 mA

External power supply voltage

range

20.4 to 26.4 V DC 20.4 to 26.4 V DC

Output ON voltage maximum

value 2 V DC 2 V DC

Leak current maximum value

when output OFF 0.1 mA 0.1 mA

Output format Current sink Current sink

Maximum load current (*1) 100 mA/channel, 26.4 V 100 mA/channel, 26.4 V

Withstanding voltage Between output signal and system: 2 kV AC, For 1 minute Between commons: 500 V AC, For 1

minute, common minus (–) side every 16-channel (*2)

Functions

Status output ON/OFF status output function ON/OFF status output function

Pulse width output One-shot pulse width output function One-shot pulse width output function

Time-proportioning output Time-proportioning ON/OFF Time-proportioning ON/OFF

Output response time 3 ms or less (for status output)

10 ms or less (for mixed status and pulse outputs)

Pulse width 8 ms to 7200 s

Pulse width resolution 8 ms, but ON/OFF delay of maximum 1 ms is added

Maximum current

consumption

700 mA (5 V DC)

60 mA (external power supply)

700 mA (5 V DC)

120 mA (external power supply)

Weight Approx. 0.20 kg Approx. 0.30 kg

External connection Pressure clamp terminal,

Dedicated cable (AKB331), MIL connector cable Dedicated cable (AKB337), MIL connector cable

*1: Connect a spark killer diode when driving DC relay.

*2: The withstanding voltage for using a dedicated cable is 500 V AC (between output signal and system).

The withstanding voltage for using MIL connector cable depends on the electrical specifications of its cable.

l Digital I/O Modules (CENTUM-ST Compatible)

The Digital I/O Modules (CENTUM-ST Compatible) receive contact or voltage status signals from the field, and/or

output status signals to the field via transistor contacts.

Item Specifications

Model ADV859 ADV159 ADV559

Number of I/O channels 16-channel input,

16-channel output 32-channel input 32-channel output

Signal isolation Isolated channels Isolated channels Isolated channels

Input signal

Contact input: OFF signal 100 k? or more

ON signal 200 ? or less

Minimum current value when contact is shortcircuited: 1.25 mA

Voltage input: OFF signal 4.5 to 25 V DC

ON signal ±1 V DC, 200 ? or less

—

Input contact rating 5 V DC, 20 mA or more —

Pushbutton input function Not supported Supported —

Input response time 8 ms (for status input) 8 ms (for status input) —

Minimum ON detection time — 20 ms (for pushbutton input) —

Maximum ON/OFF cycle — 25 Hz (for pushbutton input) —

Output signal Transistor contact — Transistor contact

Output contact rating Inductive load, resistive load:

30 V DC, 100 mA (*1) — Inductive load, resistive load:

30 V DC, 100 mA (*1)

Output response time 16 ms or less — 16 ms or less

Pulse width 8 ms to 7200 s — 8 ms to 7200 s

Pulse width resolution 8 ms, add max. 1ms for ON/OFF

delay time — 8 ms, add max. 1ms for ON/OFF

delay time

Maximum current

consumption 450 mA (5 V DC) 330 mA (5 V DC) 570 mA (5 V DC)

Weight Approx. 0.30 kg Approx. 0.40 kg Approx. 0.30 kg

External connection Dedicated cable (KS2) Dedicated cable (KS2) Dedicated cable (KS2)

Compatible card ST2 compatible ST3 compatible ST4 compatible

*1: Connect a spark killer diode when driving DC relay.

Item Specifications

Model ADV869 ADV169 ADV569

Number of I/O channels 32-channel input,

32-channel output 64-channel input 64-channel output

Signal isolation Common every 16-channel Common every 16-channel Common every 16-channel

Input signal

Contact input: OFF signal 100 k? or more

ON signal 200 ? or less

Minimum current value when contact is shortcircuited: 1.25 mA

Voltage input: OFF signal 4.5 to 25 V DC

ON signal ±1 V DC, 200 ? or less

—

Input contact rating 5 V DC, 20 mA or more —

Pushbutton input function Not supported Not supported —

Input response time 8 ms (for status input) 8 ms (for status input) —

Output signal Transistor contact — Transistor contact

Output contact rating Inductive load, resistive load:

30 V DC, 100 mA (*1) — Inductive load, resistive load:

30 V DC, 100 mA (*1)

Output response time 16 ms or less — 16 ms or less

Pulse width 8 ms to 7200 s — 8 ms to 7200 s

Pulse width resolution 8 ms, add max. 1 ms for ON/

OFF delay time — 8 ms, add max. 1 ms for ON/

OFF delay time

Maximum current

consumption 800 mA (5 V DC) 800 mA (5 V DC) 800 mA (5 V DC)

Weight Approx. 0.30 kg Approx. 0.30 kg Approx. 0.30 kg

External connection Dedicated cable (KS9) Dedicated cable (KS9) Dedicated cable (KS9)

Compatible card ST5 compatible ST6 compatible ST7 compatible