品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……进口高压电磁阀通常为活塞式结构,广泛应用于吹瓶机械、空压机、加湿设备、高温高压场合、中高温热水、导热油、高温蒸汽、饱和蒸汽及过热蒸汽等需要高压控制的系统中 The Retz high-pressure solenoid valve is usually a piston type structure and is widely used in systems that require high-pressure control, such as bottle blowing machinery, air compressors, humidification equipment, high-temperature and high-pressure occasions, medium and high temperature hot water, thermal oil, high-temperature steam, saturated steam, and superheated steam, etc

进口高压电磁阀工作原理--Working principle of imported high-pressure solenoid valve

常闭式：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

Normally closed: When the coil is energized, the pilot valve core is closed, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, and the valve upper chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.

常开式：当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

Normally open: When the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens.

注：出口端压力大于进口端压力，介质会反向导通。可安装止回阀。

进口高压电磁阀结构特点--

阀芯均为不锈钢活塞式, 活塞环不会被介质中的杂质卡死;

活塞与金属阀腔不产生直接摩擦;

独特设计,超高压力、开关自如;

先导式结构性能稳定；

线圈不易烧毁、功耗小、寿命超长

进口高压电磁阀选型参数

产品规格：1/4-2"

阀体材质：不锈钢

介质温度：0~+100℃ 

适用压力：100MPa以上，压力230MPa

介质温度：-200~+450℃。

环境温度：－20～＋50℃

介质粘度：小于50CSt （大于50时需定制）。

防护性能：防水、防爆（DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4）、防腐。

防护等级：IP67、IP65

阀芯材质: 均为不锈钢

接线方式：接线座式、引线式、插头式

控制方式：常开、常闭

电源电压：DC24~127V；AC36~380V

连接方式：内螺纹、法兰

适用介质：粘度：≤21m㎡/s，（大于21时需定制）气、水、油、蒸汽、燃气、腐蚀性气态或液态流体。

泄 漏 量：零