| 是否进口：否 | 厂家(产地)：中国 | 牌号： X7342 |
| 用途级别：中国 |
Unreinforced polybutylene terephthalate compound with increased flexibility and toughness
VESTODUR庐 HI19 is an unreinforced, semicrystalline resin, based on polybutylene terephthalate with increased flexibility and toughness for the injection molding and extrusion process.
VESTODUR庐 HI19 is suitable for the manufacture of parts with high mechanical and thermal resistance. The product contains antioxidant agents and processing aids.
VESTODUR庐 HI19 is supplied as cylindrical pellets in polyethylene packaging.
For information about VESTODUR庐 HI19, please follow the general recommendations in our flyer "VESTODUR庐 Polybutylene terephthalate - Compounds鈥�.
Pigmentation may affect values.
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30掳C.
FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT WWW.VESTODUR.COM
| Mechanical properties *** | dry / cond | Unit | Test Standard |
| Tensile Modulus | 460 | MPa | *** 527 |
| Tensile Strength | 27 | MPa | *** 527 |
| Yield stress | 27 | MPa | *** 527 |
| Yield strain | 23 | % | *** 527 |
| Stress at break | 40 | MPa | *** 527 |
| Nominal strain at break, 蔚tB | >50 | % | *** 527 |
| Tensile creep modulus, 0,5% Strain, 1h | 450 | MPa | *** 899-1 |
| Tensile creep modulus, 0,5% Strain, 1000h | 340 | MPa | *** 899-1 |
| Charpy impact strength, +23掳C | N | kJ/m虏 | *** 179/1eU |
| Charpy impact strength, -30掳C | N | kJ/m虏 | *** 179/1eU |
| Charpy notched impact strength, +23掳C | 17 | kJ/m虏 | *** 179/1eA |
| Type of failure | C | - | - |
| Charpy notched impact strength, -30掳C | 8 | kJ/m虏 | *** 179/1eA |
| Type of failure | C | - | - |
| Tensile-impact strength, notched, atN +23掳C | 250 | kJ/m虏 | *** 8256/1 |
| Flexural modulus, 23掳C | 450 | MPa | *** 178 |
| Flexural stress at conv. deflection, 23掳C | 15 | MPa | *** 178 |
| Flexural strain at flexural strength, 23掳C | 9 | % | *** 178 |
| Flexural stress at break, 23掳C | N | MPa | *** 178 |
| Flexural strain at break, 23掳C | N | % | *** 178 |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature | 197 | 掳C | *** 11357-1/-3 |
| Glass transition temperature | 2 | 掳C | *** 11357-1/-2 |
| Temp. of deflection under load A, 1.80 MPa | 50 | 掳C | *** 75-1/-2 |
| Temp. of deflection under load B, 0.45 MPa | 110 | 掳C | *** 75-1/-2 |
| Vicat softening temperature A, 10 N, 50 K/h | 190 | 掳C | *** 306 |
| Vicat softening temperature B, 50 N, 50 K/h | 125 | 掳C | *** 306 |
| Coeff. of linear therm. expansion, 23掳C to 55 掳C, parallel | 150 | E-6/K | *** 11359-1/-2 |
| Coeff. of linear therm. expansion, 23掳C to 55 掳C, normal | 150 | E-6/K | *** 11359-1/-2 |
| Physical properties | dry / cond | Unit | Test Standard |
| Water absorption | 0.4 | % | Sim. to *** 62 |
| Humidity absorption | 0.1 | % | Sim. to *** 62 |
| Density | 1260 | kg/m鲁 | *** 1183 |
| Shore D hardness | 65[b] | - | *** 7619-1 |
| b: | 3 seconds |
| Burning Behav. | dry / cond | Unit | Test Standard |
| Burning behav. at thickness h | HB | class | IEC 60695-11-10 |
| Thickness tested | 0.8 | mm | - |
| Burning behav. at 1.5 mm nom. thickn. | HB | class | IEC 60695-11-10 |
| Thickness tested | 1.6 | mm | - |
| Glow Wire Flammability Index (GWFI) | 750 | 掳C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (GWIT) | 750 | 掳C | IEC 60695-2-13 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 100Hz | 4 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.6 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 220 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 330 | E-4 | IEC 62631-2-1 |
| Volume resistivity, 蟻V | >1E13 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity, 蟽E | 1E14 | Ohm | IEC 62631-3-2 |
| Surface resistance, RSD | 1E13 | Ohm | IEC 62631-3-2 |
| Electric strength, AC, S20/P50 | 27 | kV/mm | Sim. to IEC 60243-1 |
| CTI, test solution A, 50 drops value | 600 | - | IEC 60112 |
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate, MVR | 12 | cm鲁/10min | *** 1133 |
| Temperature | 250 | 掳C | - |
| Load | 2.16 | kg | - |
| Molding shrinkage, parallel | 1.4 | % | *** 294-4, 2577 |
| Molding shrinkage, normal | 1.4 | % | *** 294-4, 2577 |
东莞市聚浩塑化有限公司---位于广东省东莞市樟木头镇塑胶原料市场中心城，是截止到目前在中国大陆塑胶原料、化工原料经销行业中，最齐全、最丰富、***的现货交易商贸市场。聚浩塑化，多年来从事经营批发与代理国内外塑胶原料现货交易以及进口欧美等各国目前在全球塑料、化工行业中众多占据世界***科技研发的种种工程塑料、特种工程塑料的贸易型公司。? 公司秉承“诚信共赢”的经营宗旨， 经营品种 PA6、PA66、PA46、PA6T、PA9T、PA11、PA12、PA610、PA612、POM、PC、PC/ABS、PBT、PBT/PET、PET、TPE、TPEE、TPV、TPU、PPA、PPS、PPO、ASA、ABS、PMMA、LCP、COC、SBS、SPS、SEBS、PEI、PES、PSU、PEEK等全系列工程塑料。 主要经销产品涉及全球各***，如：杜邦（DUPONT）、奇美（Chimei）、美国液氮（LNP）、台湾南亚（NAN YA）、 伊士曼（Eastman）、美国尔特普（RTP）、美国泰科纳（TICONA）、韩国锦湖（KUMHO）、德国巴斯夫（BASF）、德国拜耳（BAYER）、美国陶氏（DOW）、日本三菱（MITSUBISHI）、日本东丽（TORAY）、日本宇部（UBE）、日本宝理（POLY）、瑞士埃姆斯（EMS）、、法国阿托（ATO）、日本出光（IDEMITSU）、日本帝人（TEIJIN）、沙伯基础（SABIC）等。
点击查看>| 企业类型 | 有限责任公司(自然人独资) | 注册资本 | 50.00万人民币 |
| 公司注册地址 | 东莞市樟木头镇先威大道85-1号塑胶商务中心二期9栋32号 | 统一社会信用代码 | 91441900MA4UNCL112 |
| 登记机关 | 东莞市市场监督管理局 | 法定代表人 | 吴双发 |
| 公司成立日期 | 2016-04-07 | 营业期限 | 2016-04-07 至 无固定期限 |
| 经营范围 | 销售：塑胶原料、其他化工产品（不含危险化学品）、高分子材料。（依法须经批准的项目，经相关部门批准后方可开展经营活动）〓 | ||
-
￥289.00
-
￥296.00
-
￥98.00
-
￥289.00
-
￥198.00
-
￥98.00
-
￥158.00
-
￥159.00
-
￥128.00
-
￥288.00
-
￥289.00
-
￥68.00
