Robust construction, compact size, ease of use, and high quality images were the primary considerations behind the 鈥�007鈥� design concept. PULNiX uses custom CCD imagers bonded to fiberoptic minifiers to achieve a very small size. The total volume of the 鈥�007鈥� series is only 233 cubic centimeters (14 cubic meters) with a weight of just 395 grams (14 oz.). Whether used for surveillance, remotely piloted vehicles or aircraft, industrial or medical imaging, the 鈥�007鈥� mini intensifiers make small very low light cameras a practicality. Available in CCIR as DN-006. The "007" series comprises three basic models, designated as "F2", "F3" or F3U for Gen II, Gen III or Gen III Ultra respectively. All versions feature an intensifier with a micro-channel plate (MCP) directly coupled via a fiberoptic minifier to a PULNiX TM-7EX 1/2" format CCD camera. The "DN" versions use fixed gain intensifiers which are designed for use in applications where little or no operator interface is required (such as RPV&锛�39;s, unmanned covert installations, etc.). The "007" cameras are extremely easy to use. All versions use 12V DC power which inputs through a standard PULNiX 12-pin connector located on the rear of the camera. One-inch format auto iris lenses having an f1200 or greater aperture (highlconditions is likely) are controlled by a 6-pin auto iris I/O connector also located on the rear of the camera. AGC (on/off) and Gamma (4.5 or 1.0) for the CCD camera are switch-selectable on the rear control panel; a manual control for CCD camera gain adjustment is also located with the other controls. All "007" ICCD cameras use 1" format C-mount lenses; auto iris lenses are mandatory when bright light conditions may be encountered. A back-focus adjustment is built into the front end of all versions. The 1/4-20 tripod mounting plate may be located on the top or bottom of the camera.y recommended in applications where exposure to bright light