| 品牌:德国UTP | 型号:ENiCrMo-4 | 焊芯直径:2.5-3.2-4.0mm |
| 牌号:UTP 776Kb/ENiCr | 产地:德国 | 材质:镍基合金 |
| 药皮性质:碱性焊条 | 直径:2.5-3.2-4.0mm | 长度:350-400mmmm |
| 焊接电流:80-120(A)A | 电流幅度:80-120(A)A | 熔点:详询 |
| 工作温度:详询℃ | 适用范围:机械设备 | 硬度HRC:68-72 |
德国UTP 776Kb/ENiCrMo-4 镍基合金焊条
http://www.yanqibxg.com
是否进口 否 品牌 其他 型号 UTP 776 Kb、ENiCrMo-4
牌号 ENiCrMo-4 产地 德国 类型 镍及镍合金焊条
材质 镍基 焊芯直径 2.5-3.2-4.0(mm) 药皮性质 碱性焊条
直径 2.5-3.2-4.0(mm) 长度 350-400(mm) 焊接电流 80-120(A)
电流幅度 80-120(A) 熔点 680 工作温度 常温
适用范围 机械设备
备注:一口价为1公斤的价格!20公斤/箱!
德国UTP 776Kb/ENiCrMo-4 镍基合金焊条
http://www.yanqibxg.com
UTP 776 Kb
Classifications covered electrode
EN *** 14172 AWS A5.11 Material-No.
E Ni 6276 (NiCr15Mo15Fe6W4) E NiCrMo-4 2.4887
Characteristics and field of use
Joint welding of matching base materials, as Material-No. 2.4819 (NiMo16Cr15W) and
surfacing on low-alloyed steels. It is employed primarily for welding components in plants
for chemical processes with highly corrosive media, but also for surfacing press tools,
punches etc. which operate at high temperatures.
In addition to its exceptional resistance to contaminated mineral acids, chlorine-contaminated
media, and chloride containing media, it resists strong oxidisers such as ferric and
cupric chlorides and is one of the few materials which will resist wet chlorine gas.
The stick electrode can be welded in all positions except vertical-down. Stable arc, easy slag
removal.
Typical analysis in
C Si Mn Cr Mo Ni W Fe
<0,02 <0,2 0,6 16,5 16,5 balance 4,0 5,0
Mechanical properties of the weld metal
Yield strength RP0,2 Tensile strength Rm Elongation A Impact strength KV
MPa MPa J
> 450 > 720 > 30 > 70
Welding instruction
For avoidance of intermetallic precipitation the stick electrode should be welded with lowest
possible heat input and minimum interpass temperature. Beam width of the prepared seam
approx. 70°, root gap approx. 2 mm. Weld stick electrode with slight tilt and with a short
arc. String beads are welded. The interpass temperature of 150 °C and a max. weaving
width 2,5 x diameter of the stick electrode core wire should not be exceeded. Re-dry the
stick electrodes 2 – 3 hours at 250 – 300 °C before use and weld them out of a warm stick
electrode carrier.
Welding positions
Current type DC (+)
Approvals
TüV (No. 05257)
Form of delivery and recommended welding parameters
Electrodes Ø mm x L 2,5 x 250 3,2 x 300 4,0 x 350
Amperage 50 – 70 70 – 100 90 – 130
德国UTP 776Kb/ENiCrMo-4 镍基合金焊条
http://www.yanqibxg.com
品牌:德国UTP
| 企业类型 | 有限责任公司 | 注册资本 | 500.00万人民币 |
| 公司注册地址 | 天津市武清开发区福源道北侧创业总部基地B19号楼479室 | 统一社会信用代码 | 91120222MAC7TE4FXN |
| 登记机关 | 天津市武清区市场监督管理局 | 法定代表人 | 马士通 |
| 公司成立日期 | 2023-02-08 | 营业期限 | 2023-02-08 至 9999-12-31 |
| 经营范围 | 一般项目:金属链条及其他金属制品制造;金属链条及其他金属制品销售;有色金属合金销售;金属制品销售;金属制品研发;有色金属压延加工;高性能有色金属及合金材料销售;锻件及粉末冶金制品销售;锻件及粉末冶金制品制造。(除依法须经批准的项目外,凭营业执照依法自主开展经营活动) | ||








