BLUE SEA SYSTEMS设计和制造交流和直流电气产品，旨在满足船用和专用车辆电气系统中的应用。

BLUE SEA充电器7622B技术参数

7622B 与 7622 相同，但不含遥控开关。7622B 可在不产生电压下降的情况下为两个独立电池组充电，并在其他时间保持 *** 隔离。具有电压检测电路、环氧封装并可连续重载，专为紧急车辆和海洋环境设计。便于两电池组系统的三线接法（BATT +、BATT +、GROUND）。

手动/自动控制开关增加了安全性，可在有电或无电时控制，并提供“锁定关闭”功能以便维修。500 A 连续额定电流。磁力锁定（ML）—自动并联系统（ACR）电流消耗极低（<40 mA）。起动隔离（SI）—可配置为发动机起动期间临时隔离房屋负载与发动机电路，以保护敏感电子设备。对两个电池组的充电进行检测，支持高输出交流发电机，至 500 A。LED 输出用于远程指示电池何时并联、隔离、处于电压锁定或处于起动/发动机隔离状态。3/8"-16 镀锡铜螺柱以获得导电性和耐腐蚀性；7/8"（22 mm）螺柱长度可接受多个电缆端子。标签凹槽用于电路标识。银合金触点在开关带电负载时提供高可靠性。

要点：

手动控制开关提供额外安全性，可在有电或无电时控制，并具备锁定关闭（LOCK OFF）功能

可选 Blue Sea 2146 Contura 远程开关用于远程操作

自动管理两个大型电池组的充电

允许在紧急起动时临时并联电池组

500 A 连续额定电流，支持高输出交流发电机

磁力锁定（ML）—ACR 电流消耗极低（<40 mA）

双重检测—检测两个电池组的充电状态

起动隔离（SI）—可配置以在发动机起动时临时隔离房屋负载以保护电子设备

LED 输出用于远程状态指示（并联、隔离、电压锁定、起动/发动机隔离）

3/8"-16 镀锡铜螺柱，导电性和耐腐蚀性优良

7/8"（22 mm）螺柱长度，可接受多个电缆端子

银合金触点，切换带电负载时可靠性高

标签凹槽便于电路标识

规格：

电池连接点（接通电压）：约 13.1 VDC

电池断开点（断开电压）：约 13.0 VDC

连续电流：500 A

峰值电流：1000 A

工作温度：控制部分 -40 至 +85 °C；电磁阀/线圈 -28 至 +48 °C

端子：电池连接：3/8" 镀层铜螺柱

电缆规格：4/0 x 2

外形尺寸：5.5" x 3.75" x 2"（高 x 宽 x 深）

重量：1.75 lb（约 0.79 kg）

认证：CE 标志

保修：终身保修

The 7622B is the same as the 7622 except it does not include a remote control switch. The 7622B enables charging of two separate banks without voltage drop, yet maintains *** ***lation at all other times. Voltage sense circuit, epoxy encapsulated and heavy duty continuous rated all designed for use in emergency vehicle and marine environments. Easy three-wire hook up for two bank systems (BATT +, BATT +, GROUND).

Automatic and Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing. 500 Amp continuous rating Magnetic Latch (ML)-ACR draws very low current (Start ***lation (SI)-Can be configured for temporary ***lation of House loads from Engine circuit during engine cranking to protect sensitive electronics. Senses charging on two battery banks and supports high-output alternators up to 500 Amps. LED output to remotely indicate when batteries are combined, ***lated, in voltage lockout, in Start or Engine ***lation 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/8" (22mm) stud length accepts multiple cable terminals Label recesses for circuit protection Silver alloy contacts provide high reliability for switching live loads.

Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing

Optional Blue Sea 2146 Contura Switch available for remote operation

Automatically manages the charging of two large battery banks

Allows temporary paralleling of battery banks for emergency starting

500 Ampere continuous rating to support high-output alternators

Magnetic Latch (ML)—ACR draws very low current (<40ma)

Dual sensing—senses charge on both battery banks

Start ***lation (SI)—can be configured for temporary ***lation of House loads from Engine circuit during engine cranking to protect sensitive electronics

Senses charging on two battery banks

LED output to remotely indicate when batteries are combined, ***lated, in voltage lockout, or in Start or Engine ***lation

3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance

7/8" (22mm) stud length accepts multiple cable terminals

Silver alloy contacts provide high reliability for switching live loads

Label recesses for circuit identification

Specifications:

Battery Connect Point: 13.1 VDC (approx.)

Battery Disconnect Point: 13.0 VDC (approx.)

Maximum Continuous Current: 500 amps

Peak Maximum Current: 1000 amps

Operating Temperature: Control: -40 to +85° C / Solenoid: -28 to +48° C

Terminals: Battery Connections: 3/8" plated copper studs

Maximum Cable Size: 4/0 x 2

Dimensions: 5.5" x 3.75" x 2" (H x W x D)

Weight: 1.75 lbs

Approvals: CE Marked

Warranty: Lifetime

BLUE SEA充电器其他常用型号：

BLUE SEA 7622B

BLUE SEA 7620

BLUE SEA 7620100

BLUE SEA7621

BLUE SEA 7621100

BLUE SEA 7622

BLUE SEA 7622100

BLUE SEA 7623

BLUE SEA 7623100

BLUE SEA charger NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供***解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于BLUE SEA充电器7622B的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。

If you have any question for BLUE SEA products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.

BLUE SEA充电器7622B技术参数及产品介绍