中文：凯泉KQK-BDX-22消防栓控制柜

核心定位： 专为消火栓给水系统设计，集生产、销售、调试及售后于一体的智能化控制核心。

• ***： 产品严守消防规范，带有国家强制性产品认证 CCCF 标志，确保项目验收顺利通过。

• ***设计： 无论在功能逻辑、电路设计还是元件选择上，均体现了凯泉集团的高标准要求。

• 广泛兼容： 能***匹配凯泉各类水泵电控需求，如 XBD系列消防泵，XBC系列柴油机消防泵，是消防系统的理想配电方案。

• 全方位服务： 提供从设备生产到现场调试及后期维护的全生命周期服务支持。

English: Kaiquan KQK-BDX-22Fire Hydrant Control Cabinet

Core Positioning: An intelligent control core designed for fire hydrant water supply systems, integrating production, sales, commissioning, and after-sales service.

• Authoritative Certification: Strictly complies with fire safety regulations and carries the CCCF certification, ensuring smooth project acceptance.

• Superior Design: Reflects Kaiquan Group&＃39;s high standards in functional logic, circuit design, and component selection.

• Broad Compatibility: Perfectly matches various Kaiquan pumps, such as 100KQL circulation pumps or DG series pumps, serving as an ideal electrical solution.

• Comprehensive Service: Provides full lifecycle support, from manufacturing to on-site commissioning and long-term maintenance.

二、 安装方案 (Installation Plan)

中文：安装操作规范

1. 环境检查： 安装于通风干燥的配电间内，确保无剧烈振动或腐蚀性气体。

2. 接线要求： 严格按照接线图进行主电源与水泵电机的连接，确保接地电阻符合安全标准。

3. 联动调试： 确认控制柜与消火栓箱按钮、压力开关等远程触发信号的逻辑联动正常。

English: Installation Standards

1. Environmental Check: Install in a ventilated and dry distribution room, ensuring no severe vibration or corrosive gases.

2. Wiring Requirements: Strictly follow the wiring diagram for main power and pump motor connections, ensuring grounding resistance meets safety standards.

3. Linkage Commissioning: Confirm the logical linkage between the control cabinet and remote signals such as fire hydrant buttons and pressure switches is functioning correctly.

三、 维修与保养方案 (Maintenance & Service Plan)

中文：维保手册

1. 定期巡检： 每月检查电气元件是否有松动、过热现象，确保信号灯指示正常。

2. 模拟测试： 每季度进行一次手动/自动启动测试，确保在紧急时刻消防泵能瞬间启动。

3. 除尘清洁： 保持柜内清洁，防止粉尘堆积导致短路。

English: Maintenance Manual

1. Regular Inspection: Monthly checks for loose electrical components or overheating, ensuring all indicator lights work correctly.

2. Simulation Testing: Perform quarterly manual/automatic start tests to ensure the fire pump can start instantly in emergencies.

3. Dust Cleaning: Keep the interior clean to prevent short circuits caused by dust accumulation.

If you have any questions, please feel free to contact me via WhatsApp: +1 4152023148, or send an email to oeteco@gmail.com.