| 产品特性:易于施工 | 产品名称:不饱和聚酯树脂 | 含量≥:55% |
| 产商/产地:常州 | 品牌:天马玻纤 | 是否危险化学品:是 |
| 是否进口:否 | 产地:常州 | 牌号:191# |
| CAS:26098-37-3 | 固体份:55% | 用途:制作玻璃钢 |
| 规格:220kgs |
Technical Data Sheet
TM-191TP General Unsaturated Polyester Resin
1銆�Brief Introduction锛�
TM-191TP is a type of promoted and throxitropic general purpose UP resin. It has the characteristics of low viscosity, good mechanical strength and high elongation. It is suitable for all kinds of general FRP products in the hand lay-up process.
2銆� Liquid resin technical data:
Item | Unit | Index | Test standard |
Appearance | 鈥斺�� | Purple liquid | GB/T 8237.6.1.1 |
Viscosity | 25 Degree Pa.S | 0.40~0.60 | GB/T 7193.1 |
Gel time | 25 Degree min | 15.0-25.0 | GB/T 7193.4.6 |
Thixotropy index | -- | 鈮�1.5 | RS-V007 |
Gel Time: resin- 50g, Butanox M-50 1.0g
3銆�Casting & FRP performance
Item | Unit | Measured Value | Test Standard | |
Casting Body | FRP Sheet | |||
Barcol Hardness | 鈥斺�� | 42 | 58 | GB 3854-2005 |
HDT | 鈩� | 68 | -- | GB 1634-2004 |
Flexural Strength | MPa | 115 | -- | GB/T 2567-2008 |
360 | GB/T1449-2005 | |||
Tensile Strength | MPa | 63 | -- | GB/T 2567-2008 |
-- | 290 | GB/T1447-2005 | ||
Elongation at break | % | 3.5 | GB/T 2568鈥�95 | |
Impact Strength | KJ/m2 | 10.3 | -- | GB/T 2571鈥�95 |
-- | 238 | GB/T1448-2008 | ||
Remark锛欳asting matrix should follow GB8237-2005 @ 25鈩�
Hardness system锛欱utanox M-50 1.5%, Accelerator 0.8%Co/oct 1.0 %
Later Hardness system锛歊oom temperature X 24hrs+60鈩兠�3hrs + 110鈩兠�2hrs
| 企业类型 | 有限责任公司 | 注册资本 | 21300.00万人民币 |
| 公司注册地址 | 常州市新北区黄海路309号 | 统一社会信用代码 | 91320400137166327N |
| 登记机关 | 常州国家高新技术产业开发区(新北区)行政审批局 | 法定代表人 | 邵俊 |
| 公司成立日期 | 1980-06-30 | 营业期限 | 1980-06-30 至 2033-02-27 |
| 经营范围 | 危险化学品生产(含不饱和聚酯树脂)(按安全生产许可证核定范围经营);危险化学品批发(按危险化学品经营许可证核定范围经营);玻璃纤维及制品、玻璃钢制品、冷却塔、模塑料及制品、胶衣树脂及辅料、乙烯基酯树脂、粘结剂及乳液、浸润剂、土工材料的制造及销售;化工原料、玻纤原料的销售;玻璃钢及原辅材料的检测、技术培训及咨询服务;自有房屋租赁;成员企业的污水处理及服务;涂装工程的设计施工;金银制品的加工与销售;自营和代理各类商品及技术的进出口业务(国家限定企业经营或禁止进出口的商品和技术除外)。(依法须经批准的项目,经相关部门批准后方可开展经营活动) | ||



