主要工作辊道紧靠工作机架，辊道生产，它将轧件喂入轧机和接受轧出轧件，辊道哪家好，因此它是经常参加工作的辊道，故称主要工作辊道。

轧件长度超过主要工作辊道时，由另一组工作辊道参加工作，这一组辊道叫辅助工作辊道，或称为延伸辊道。

The main work table is close to the work rack. It will feed the rolling piece into the rolling mill and accept rolling and rolling parts. Therefore， it is a roller table that often works. So it is called the main work roller table.

When the length of the rolled piece exceeds the main work roller Road， another group of working rollers is involved in the work. This group of rolls is called the auxiliary work roller， or the extension roller.

皮带输送机的常规设计方法所存在的问题带式输送机常规设计方法实际上是一种安全或是偏于保守的设计方法。例如。选用的输送带安全系数、运行阻力系数偏大，从而造成选用的电动机功率过大，带宽过宽或是抗拉强度要求较高。

The conventional design method of belt conveyor is a safe or conservative design method. For example. The safety factor and the running resistance coefficient of the selected conveyor belt are too large， resulting in excessive power selection，辊道， wide bandwidth or high tensile strength.

在带钢热连轧机上使用着许多辊道，它们被分成若干段，辊道价格，每一段辊道或者以独立的或者以与轧辊同步的速度和方向运送轧件。

为使轧件能够在辊道中心运行，采用鼓形辊，并且交替地使左右两边的水平面稍微倾斜，或者使辊子的轴线与轧件运行方向的交角交替地比直角稍微偏斜一些。

Many roller tables are used on hot strip mills. They are divided into several segments， each section of rollers or parts transported independently or at the same speed and direction with the rollers.

In order to make the workpiece can be run in the center of the drum shaped roller， roller， and alternately on both sides of the horizontal plane or slightly tilted， the roller axis and the running direction of the rolling angle alternately than some slightly skewed angle.

辊道-圣霖国际【用心服务】-辊道价格由鞍山市圣霖进出口贸易有限公司提供。辊道-圣霖国际【用心服务】-辊道价格是鞍山市圣霖进出口贸易有限公司（）今年全新升级推出的，以上图片仅供参考，请您拨打本页面或图片上的联系电话，索取联系人：王秋。