CAN-CBX-AI420有4路模拟量输入20bit分辨率的CANopen输入模块

CAN-CBX-AI420

CANopen? Module with 4 Analog Inputs, 20 Bit Resolution

CAN-CBX-AI420

具有 4 个模拟输入、20 位分辨率的 CANopen? 模块

4 Sigma-Delta A/D-Converter Inputs

Resolution: Up to 20 bits

Programmable input voltage range: ±10V

Easy control cabinet wiring due to 3-lead connection

CANopen profiles according to CiA? specification CiA 301 and CiA 401

4 个 Sigma-Delta A/D 转换器输入

分辨率：高达 20 位

可编程输入电压范围：±10V

3 线连接，便于控制柜接线

符合 CiA? 规范 CiA 301 和 CiA 401 的 CANopen 配置文件

Approved Reliability and Ease of Use

Approved Reliability and Ease of Use

Electrical ***lation of analog inputs

InRailBus technology combines high ease of use and proven reliability

DIN-EN carrier rail mounting (TS 35)

经认可的可靠性和易用性

经认可的可靠性和易用性

模拟输入的电气隔离CANopen模拟量输入模块，兼容CAN，支持CANopen cia301和401

InRailBus 技术结合了高度易用性和久经考验的可靠性

DIN-EN 载轨安装 (TS 35)

Firmware adaptable to Customer Requirements via CANopen

Analog Inputs

The CAN-CBX-AI420 module is equipped with two precision, high throughput analog front ends with ΣΔ A/D-converters that in common offer four analog input channels.

Depending on the selected sample rate and the external wiring a resolution of at least 20 bit can be achieved. The input voltage range is programmable.

通过 CANopen 适应客户要求的固件

模拟输入

CAN-CBX-AI420 模块配备两个精密、高吞吐量的模拟前端，带有 ΣΔ A/D 转换器，它们共同提供四个模拟输入通道。

根据所选的采样率和外部接线，可以实现至少 20 位的分辨率。 输入电压范围是可编程的。

Compact I/O modules with DIN rail mounting

The CAN-CBX series is equipped with the InRailBus used by esd and offers industry-compatible CAN bus input/output modules in combination with user-friendly "wiring" of CAN bus and supply voltage.

采用 DIN 导轨安装的紧凑型 I/O 模块

CAN-CBX 系列配备 esd 使用的 InRailBus，并提供行业兼容的 CAN 总线输入/输出模块，结合用户友好的 CAN 总线和电源电压“接线”。

CAN Interface and LED Display

The CAN interface is designed according to *** 11898-2 and achieves bit rates of up to 1 Mbit/s. The CANopen node number and the CAN bit rate can be easily adjusted via rotary switches. Four LEDs indicate the status of the module and CANopen nodes.

CAN接口和LED显示屏

CAN 接口根据 *** 11898-2 设计，可实现高达 1 Mbit/s 的比特率。 CANopen 节点号和 CAN 比特率可以通过旋转开关轻松调整。 四个 LED 指示模块和 CANopen 节点的状态。

InRailBus for easy wiring

The power supply and the CAN bus signals can be supplied via the InRailBus connector (TBUS connector) integrated in the mounting rail. In this way, a minimum of cabling of the individual modules is achieved. All esd CBX modules are compatible with each other and can be plugged onto the bus as required. It is also possible to disconnect individual modules from the InRailBus without interrupting the bus signals or the power supply.

Software Support

The CAN-CBX-AI420 comes with CANopen firmware according to CiA 301 and and with a CANopen-I/O profile according to CiA 401.

InRailBus 便于接线

电源和 CAN 总线信号可通过集成在安装导轨中的 InRailBus 连接器（TBUS 连接器）提供。 通过这种方式，实现了单个模块的最少布线。 所有 esd CBX 模块相互兼容，可根据需要插入总线。 也可以在不中断总线信号或电源的情况下将各个模块与 InRailBus 断开连接。

软件支持

CAN-CBX-AI420 带有符合 CiA 301 的 CANopen 固件和符合 CiA 401 的 CANopen-I/O 配置文件。